Help for
Order Form
Please
go to the corresponding number from the
order
form
for guidance...
1. Print your name and
address you want the new System sent to.
Reference refers to who is going to wear this
system ?
2. Write a daytime phone
number you can be reached at including area
code.
3. Men's and women's Systems
are generally (but not always) made differently.
Men usually use a tape tab on the front, women
usually don't. Women are usually able to utilize
what hair they have by integrating it up through
holes in the System.
Base Type:
There are several to choose from. These are the
most common.
#1
is an M-Mesh (Fine mono) base with a scalloped
front and a 3/4" clear poly skin perimeter, used
for either daily or extended wear.
#2 is an M-Mesh
(Fine mono) base with underventing, and a 1"
poly coated perimeter, used for either daily or
extended wear.
#3
is a replaceable French lace front (our most
natural looking front hairline) with 1/2" P.U.
coated behind lace (this makes the lace
replaceable), M-Mesh (Fine mono) for the base
behind the lace and a 1" poly coat around the
sides and back. This may also be used for daily
or extended wear.
#4 This base is the
same as #3 except the replaceable front is fine
welded mono, which is a little more sturdy,
though not as soft to the touch as French lace
#5 This base
(mostly used by women) is an integration system
made with monofilament line. It's purpose is to
enhance the hair you already have by integrating
your own hair into the system. You can get the
holes in any size depending on how much of your
own hair you have to pull through. This system
can be attached using clips for daily wear or
sewn in for extended wear.
#6 This is a full
wig. This system can be used for either a man or
a woman. It is used mostly for daily wear. For
an extended wear full wig. We suggest using an
M-Mesh base with a clear polyskin perimeter (see
example #1 or #2).
4. Our Synthetic hair is
made of Kanekalon and Toupelon. Our 100% Human
Hair is made of the finest Indian hair
available. You can request 100% of one or the
other or a mixture of both. Grey hair is most
always synthetic. We can use Yak (animal for
human grey).
5.
The easiest thing to do is send us an
old system that fits properly. We will use the
same base measurement and return it with your
new System. If that is not an option then do
either a
Measurement or Tape
Template
below:
Measurement
For men: A) Place three to four
fingers above the eyebrows and
locate with a pen dot the beginning
of the natural hairline.
B) Measure from that point backwards
to the beginning of the present
hairline.
For extended wear users
measure 1/4 - 1/2 inch further back
into the present hairline so system
will be large enough to attach to
your own hair.
C) Measure from the beginning
hairline (side to side) across top
of the head.
For extended wear users
measure 1/4 - 1/2 inch further down
each side of the present hairline so
system will be large enough to
attach to your own hair.
For women: Side measurement is done
like men's above. However, front to
back is different. Because women
typically thin in front but don't
recede like men do, it is wise to
use the natural bang and add hair
behind it. (Some men may choose to
do this technique also). Start your
measurement about 1 inch behind
natural front hairline, going over
the top to back as far as it needs
to cover the thin area. |
To Make a Tape
Template
Printable
Simple Instructions
(1). Stretch Saran plastic wrap
over persons head. Twist at sides
and have the person hold down
firmly.
(2). Run clear see through Packing
tape strips from front to back and
from side to side - overlapping to
form a solid cap. Four layers are
usually enough.
(3). Draw (using a permanent marker)
the exact outline of the hairpiece
size you want, front recession
lines, part placement (if any), hair
direction, exactly as you want them
on the finished hairpiece. (Use
guidelines in
Measurements above
to help with determining size)
(4). Remove template from persons
head and cut off excess tape around
edges.
Call us if you have any
questions regarding making a
template or you may want to see our
instructional VHS video.
|
6.
Left, right, center partings are for definite
parts. If you wish to part on either side or use
no part choose Multi-directional.
7.
Take sample from crown or back. Scotch tape
around end of sample. Please write down what
part of the head your sample is coming from. If
your sides are more Grey, clip a sample. Be sure
to identify this for sides only. Grey hair is
offered in synthetic or Yak.
8.
Curl size in millimeters is determined by
professional perm rod used. See diagram below.
9.
Extra Light density is 60% thickness of an
average head of hair.
Light density is 80% thickness
of an average head of hair.
Light to Medium Density is
considered 90% thickness of an average head of
hair .
Medium Density is considered
100% thickness of an average head of hair (This
is considered normal).
Medium to Heavy Density is
considered 120% thickness of an average head of
hair (This is thick).
Heavy Density is 150% thickness
of an average head of hair (This is very very
thick).
10.
If you want anything different than System
Special features, list them here. System
features (unless otherwise requested) include:
*Regular Indian Human Hair. Grey is synthetic.
* Base material on men's System is M-Mesh with
3/4 inch Polyurethane see through tab perimeter.
Front tab is 3/4 inch glass silk with scallop
front edge. Lace front may be requested. To
learn more about scallop front and lace front
see bottom of page.
* Base material on Women's Integration System is
1/2 inch Braided Monofilament (fish type net)
and 1/4 inch M-Mesh Ribbon around perimeter for
weave attachment. Can also be used with clips
* Average length on
all Systems are 4-6 inches. If you want longer
length than 8 inches, please add $40.00 for
every 2 inches. Example: 10 inches long is
$40.00 more. 12 inches is $80.00 more and so on.
Matching tape tab
#('s)
| If you would like tape tabs with
this order, specify by letter(s)
which kind of tape you prefer. Each
letter you choose comes with 5 bags
of tape for only $20.00. Enter
letters and total on order form. |
Frontal tape tab
A. Brown
liner-Opaque
B. Red
Tack-Transparent
C. White
liner-Transparent |
Rolls-for
daily or extended wear 3/4" x 108"
D. Brown
liner-Opaque
E. Red
Tack-Transparent
F. White
liner-Transparent |
We also have Cindycut
Lacestik Tape in frontal or Straight-
Shop online for a wide variety of tapes
adhesives, etc.
NOTE: Women's
systems don't generally use tape tabs on
integration units. Any questions you may have
about your desires on a custom hair system are
welcome. We are here to help you place your
order.
The
following
is a detailed description of the most popular
system fronts on the market today.
Scallop Front - This is
a thin clear skin like Polyurethane
material designed to be slightly wavy
along the hairline giving a realistic
appearance. This type of front lasts the
longest. Density (thickness) can be
whatever you choose. Scallop front is
attached using a tape tab. Underventing
(hair coming from the underneath side
side of unit) cannot be done with a
scallop or lace fronts. It would show
too heavy of a solid line. Underventing
is done on the front hairlines that go
in a straight line, but this is an older
method for fronts.
Lace Front - This is
the newest rage in modern hair
replacements. A very thin French Lace or
Welded Mono Lace is placed on the front
of the unit from temple to temple and
back about 2"-3" or so for a replaceable
front or the entire unit can be made
with this material making it a
disposable unit.. The lace is invisible
to the eye and hair appears to be
growing from the scalp, even with up
close scrutiny. Density in lace works
best choosing 'light to medium', at
least in lace area only. The back of the
system is made the same way as before,
with tape tab perimeter or as desired.
The lace front is attached to the scalp
with a special lace tape or adhesives (see
price page) applied to the skin in
lace area only. Then the system lays
down on top of adhesive, no tape is
required in front. This lace front is
designed to be replaceable because it is
very fragile. The client must treat it
very gently. Even still, most people can
only go up to about 6 months before
needing a repair. It really is not as
expensive as you might think to
maintain. It is recommended to purchase
two systems at a time. When one unit
needs a new lace front put on, send it
to us. We place a 4-5 week priority rush
on repair. The unit comes back cleaned,
totally revented (more hair put in all
over), with a whole new Lace front. It
looks like a brand new system. For the
best system on the market and the most
real looking, you can't beat our repair
price of only $150.00 + $50.00 to
replace lace front. And you can replace
the front as many times as you want
until the rest of the system is totally
worn out!
Cindycut Home
/ Hands on Hair
Replacement Training Free 30 day Trial on 98
minute DVD
|
